- Motion detection surveillance records video clips by motion. The motion sensitivity can be set under the red dot record button's menu. There is also a Zones (Mask) button to exclude/mask rectangular regions that should not be sensitive to motion or that have to be obscured (privacy mask).
- Continuous recording can be used to continuously or manually record. Use the red dot record button's menu to switch between Continuous REC and REC OFF. When restarting ContaCam the previous recording state resumes. It has to be remembered that the video files are always split according to the Split longer than value configured under Camera Advanced Settings.
Note: independently from the chosen usage it's always possible to take manual snapshots through the Camera - Snapshot command.
- Daily summary video creates at midnight a fast playing full day video. Decreasing the frame interval below the default of 30 seconds will generate a more detailed and longer full day video, increasing that value will result in the opposite.
- Autostart camera when ContaCam is executed is usually selected, can be unchecked in case of manual recording or manual snapshots usage.
The given name will be used in the camera view's title bar and to access the camera through the web interface. It is also the folder name where all the videos and the snapshots are stored. Leaving the camera name blank will restore the default name.
3. Web interface
- The web interface language and style can be chosen here.
- Full stretch live view will fill the entire view disregarding the aspect ratio.
- Allow deleting files enables the removal of the recordings from the web interface (please protect the web access with User Name and Password under Global Settings).
- Allow obscuring source can be checked to be able to disable/obscure the video/audio source from within the web interface (please protect the web access with User Name and Password under Global Settings).
- Thumbnails per page sets the maximum number of Small videos (animated gifs) shown in the web browser per displayed page.
Hint: the web interface settings changes will be visible after pressing the web browser reload button.
- Keep files for is set by default to a month and can be adapted to your needs. Please wait at least 15 minutes to see the removal of old days.
- Minimum disk free space in percent is set to avoid filling your hard-disk and crashing the system. For example on a computer with a 1000 GB hard-disk, 5% means that if your HD has left less than 50 GB of free space the oldest video files are delete until the free space is again above 50 GB (the cleaning granularity is by day, so that only entire days are deleted and not single videos inside a day). Setting the minimum disk free space to 0% makes you responsible for cleaning / checking the hard-disk.
- Maximum camera folder size is useful when saving the files in a place of limited storage like a cloud drive or a network share with user quota. Oldest video files are delete until the used size drops below the chosen maximum camera folder size. Setting a value of 0.0 disables the maximum camera folder size check.
To get automatic email messages it's first necessary to enter the email settings by pressing the To, Subject, Server button. Then the wished notification types can be chosen by the check-boxes.
Basic setup is done and the camera is ready to be used. After pressing the OK button it's possible to watch the recordings with the live stream on your web browser by calling Recordings Browser from the View menu.