Print
Parent Category: Manual & FAQs
Category: 03 ContaCam Settings
cameraadvancedsettings

 

Video

Audio

Recording Save

Live Snapshot

Control

Command

Reduce false detections

  1. In the menu of the red dot record button decrease the Motion Sensitivity to 40, 30 or 20.
  2. Increase Drop shorter than to 2-4 sec (see above under Video section).
  3. With the Zones (Mask) designer (red rectangles button) erase active zones or draw active zones with lower sensitivity.
    If choosing Draw active zones (50% main sensitivity) the drawn zones will be marked with 50 and will have half of the main sensitivity set under the red dot record button menu. Taking the picture below that would signify a sensitivity of 50% x 40 = 20 for the zones marked as 50. Choosing Draw active zones (25% main sensitivity) will create zones with a quarter of the main sensitivity set under the red dot record button menu and so forth.

relative sensitivity