Parent Category: Manual & FAQs
Category: 06 ContaCam Advanced Tasks

Exposure, brightness, contrast, ... adjustments are camera specific and are provided by the camera drivers or the camera configuration web interface. ContaCam just shows what is given by the camera manufacturer.

brightness_usb.jpgFor USB camera / capture card

Go to Camera Advanced Settings and press the Source Settings button to display the driver provided dialog.
Note: some drivers do not store the set values; ContaCam can do nothing about that, please contact your camera / capture card maker.

brightness_ip.jpgFor IP camera

Go to its web interface (accessed through http://camera_ip_address from your web browser).